Posts filed under the rushcutter

New images : The Rushcutter

COVER.jpg

When I decided to do a shoot for the release of the Acton dress, I thought it would be a good time to get some images of the Rushcutter too! So today I'd show some of them too, as you may have missed the updates to the product listing.

For View A I chose to use a beautiful mid-weight denim. Really, since I made my own denim Rushcutter, it's just hard to think about using anything else!

It really holds the shape beautifully - especially the pockets - and it shows all the details really well. And I knew it would work beautifully with my model's (Caz from Useful Box) lovely red hair. So that was just a no brainer!

For View B it was a little trickier. I wanted something summery, but also something that wouldn't overtake the details. Enter cotton stripe! I am really pleased with how this one turned out. I had lots of fun playing with the stripe direction and I think overall it works really well.

The only problem was that I din't realise how sheer it was until I got it home, which meant I had to omit the in-seam pockets and my model (my sis') had to wear a nude slip underneath. Lesson learned for next time!


You may also like:

Posted on November 29, 2016 and filed under inspiration, sewing inspiration, sewing patterns, the rushcutter.

A round-up of Rushcutters

When I decided to start a business creating sewing patterns, I never in a million years could have imagined what it would feel like to see people actually using the pattern I made to make a garment. Back then it was a very distant concept, one that I had no way of visualising. Even when I put the pattern through testing, I couldn't imagine what it was going to be like to see women of all different shapes and sizes, styles and tastes, sew up one of my dresses. I sat around nervously waiting for the feedback. I had spent so much time perfecting the pattern, and I was so nervous there would be something I had somehow not thought of or missed. 

Image credit: Sweet Red Poppy

When the first image arrived in my inbox (image care of Sweet Red Poppy), I squealed in delight. Someone had actually used my pattern to make a dress that fit them!  

the_rushcutter_roundup_1

(Images : In a Manner of Sewing / Right : Pigeon Wishes)

I couldn't believe how different each dress looked, and how each tester had really made the dress their own. 

Now, six months on, more photos have been popping up and I thought I'd share them with you, as an ode to all the incredible women who have sewn my pattern!

The Indie Sew Spring Collection

As you may have seen, the Rushcutter was included in the Indie Sew Spring Collection, which meant some amazing bloggers made the Rushcutter as part of the release.

the_rushcutter_roundup_2

(Image: Indiesew)

Allie, from Indiesew, made the most beautiful Rushcutter for the collection lookbook. I just love how she used the reverse of the fabric as a contrast feature on the pockets and centre front panel. 

Fleurine from Sew Marie Fleur

(Image: Sew Marie Fluer)

Fleurine was one of the bloggers who chose to sew the Rushcutter as part of the blog tour. She made the sleeveless version (View B) and made the yoke in a contrasting fabric, which really is a beautiful touch. 

(Image: Sew Marie Fluer)

I was just so blown away by her photographs. She bravely went out in the cold to get these incredible shots (she lives in northern Norway). That's true dedication to sewing, right?

Beth from Sew DIY

(Images: Sew DIY)

Although Beth was part of the Indiesew blog tour (because her lovely Lou Box Top was also part of the collection), she didn't make the Ruscutter, as she had already made it a few weeks earlier. Late last year, Beth and I decided it would be fun to do a little pattern swap. I made her Lou Box top (which I'm wearing right now as I type), and she made this beautiful Rushcutter

Kate from Sewing with Kate

the_rushcutter_roundup_6

(Images: Sewing with Kate)

I am lucky enough to call the lovely Kate, from Sewing with Kate, a close friend. We met on Instagram, and then realised we were lucky enough to live very close to one another! She made this beautiful long sleeved Rushcutter from a second hand fabric find, which I just love. 

Instagram

(Image: @asamariaborg)

(Image: @eclare71)

Do you follow me on Instagram? If you do, you may have seen a few of these Rushcutters. But I thought I'd share them again, because they are just so lovely!

Screen Shot 2016-03-15 at 2.20.06 PM.png

(Image: @fruitvore)

(Image: @thefoldline)


Over to you

Have you made a Rushcutter? I would just love to see it! You can tag your photos on Instagram with the hashtag #therushcutter or send me an email if you're not Instagram. 

Posted on March 25, 2016 and filed under sewing inspiration, the rushcutter.

Pattern Hack : Rushcutter View A with Buttons

Rushcutter_hack_buttons_1

Original Technical Drawings

Recently, a customer got in touch and said that she wanted to make the Rushcutter View A (the version with sleeves), but would like to add buttons to the back, like View B, but wanted to check if it was an easy adjustment to make to the pattern. 

Rushcutter_hack_buttons_2

A Rushcutter with sleeves and buttons

Rushcutter_hack_buttons_3

It is a nice and easy adjustment to make, and it is a tutorial I have been meaning to create forever, so I thought this was a sign it was about time I got around to it, as I am sure she is not the only one who would like to make this adjustment!

A little bit about In the Folds patterns

If you have used the Rushcutter pattern, you will know that both stitching line and cutting lines are marked on the pattern.

Why is the stitching line marked?

When I first decided to start creating sewing patterns for home sewers, one of the first decisions I made, before I even started sketching, was that I wanted to create patterns that would help sewers develop their skills, in both sewing and pattern making.

By including the stitching lines on each pattern piece, it makes it much easier to understand how the pattern was originally made, but also allows for easy adjustments and 'hacking' to the pattern (as all pattern alterations should be done without seam allowance added to the pattern). 

Rushcutter_hack_buttons_4

In the image you can see that the stitching line is marked with a red line, while the cutting line (outside edge of the pattern) is marked with a thick black line. If you wanted to make changes to this particular pattern piece, you could simple cut along the stitch line to remove the seam allowance, and the piece would be ready to be altered.

Understand your pattern

Before making any adjustments to a pattern, I always suggest having a good idea of how the pattern works and fits in it's original design.

So, for this example, have a look at how the button placket works on View B, before adding it to View A.

The button placket

Rushcutter_hack_buttons_5

As you can see, the button placket is made up of three sections, that folded to create the button placket. The first (closest to the centre back) is 1cm from the centre back. This is the first fold line. The next line is 2cm from the first fold line and is the second fold line (the buttons and button holes will be placed between these two lines). And the third line is 1cm from the second fold line and is the edge of the pattern piece. 

Rushcutter_hack_buttons_6

When the piece is cut, the first fold line is folded and pressed towards the centre back.

Rushcutter_hack_buttons_7

The second fold line is folded and pressed, enclosing the raw edge inside, creating a button placket. 

Rushcutter_hack_buttons_8

To finish, the buttons and button holes are placed on the centre back line. To see how this looks in fabric, you can check out this step from the Rushcutter Sew-Along.

Make the adjustment

Rushcutter_hack_buttons_8

Take the 'UPPER BODICE' pattern piece from View B, and cut along the centre back line, removing the placket from the pattern. If you would like to keep the pattern intact, simply trace a copy of the placket section onto a seperate piece of paper. 

Rushcutter_hack_buttons_9

Now that you have removed the placket, you can get your sleeve pattern (from View A) ready.

Rushcutter_hack_buttons_10

You will be placing the right edge of the placket onto the centre back of the sleeve pattern (the stitch line).

Attach placket to sleeve

Rushcutter_hack_buttons_11

Line the placket up with the centre back of the sleeve pattern and tape or glue in place.

And that's it... Your Rushcutter is ready for buttons instead of a zip!

If you don't have the placket piece from View B

If you have already printed your pattern, and then decided to change from zip to buttons, and don't have the pattern pieces from View B, do not worry! It is super simple to create the placket piece, with the help of a pencil and a ruler.

Remove the seam allowance

Rushcutter_hack_buttons_12

Take your sleeve pattern and remove the seam allowance from the centre back seam (by cutting along the stitch line marked on the pattern).

Rushcutter_hack_buttons_13

Take a small piece of pattern paper, and tape it to the centre back of the pattern, creating space for your placket.

Rushcutter_hack_buttons_14

Create the placket by:

1. Drawing a line 1cm (3/8in) from the centre back, running parallel to the centre back. 

2. Drawing a second line, 2cm (3/4in) from the first

3. The final line will be drawn 1cm (3/8in) from the second line. 

Complete the placket shape

Rushcutter_hack_buttons_14

Extend the top and bottom edges of the sleeve pattern to complete the placket shape.

ADD PATTERN MARKINGS

Rushcutter_hack_buttons_15

Complete the placket by adding button / buttonhole placement markings.

And you are ready to sew!


Over to you

Do you have a pattern hack for the Rushcutter in mind? I'd love to hear about it!

If you use this tutorial, I'd love to know! Simply tag your photos on Instagram with the hashtag #draftingwithinthefolds.


You may also like:

Posted on February 2, 2016 and filed under pattern making tutorials, the rushcutter.

How to make a waist sash

how_to-make_a_waist_sash_1

Last week, we pretty much finished sewing our Rushcutters! All we've got to do now is create a the waist sash (if you want a waist sash for your Rushcutter. It's totally optional!) 

Creating a waist sash is a really simple way to totally transform a silhouette. I decided to include a waist sash in the Rushcutter pattern to give sewers more options for their pattern.

If you haven't got the pattern, don't worry, keep reading, I'll tell you what measurements I used so you can make a waist sash for any pattern you like!

Drafting the pattern

First, you will need to consider how wide you would like your sash to be.  As a guide, the waist sash on the Rushcutter is 3.5cm wide.

Then you need to think about how long you would like your sash to be. Remember, you will need quite a bit of extra length for the bow. Consider tying some string or ribbon around your waist to work out how much extra you will need. For the Rushcutter, I took the waist measurement and added 1.15m for the tie. Sounds like a lot, but you really do need it!

Once you have your measurements, you can draft the pattern (or draw straight onto the fabric with tailor's chalk). Draw a rectangle DOUBLE the width of your finished waist sash and HALF the length of your finished sash. 

Add seam allowance (I went for 1cm, but this is up to you) to all sides. If you would prefer not to have a seam in the centre back, just add seam allowance to three sides (2 long sides and 1 short) and then write 'place on fold' on the side that doesn't have seam allowance.

Draw a line that cuts the pattern piece in half horizontally that will be your grainline and fold line.

Sew the sash

Take the two WAIST SASH pieces (from The Rushcutter pattern or the pieces you drafted) that you have cut and, with right sides together, join them together at the centre back with a 1cm (3/8in) seam allowance. Once stitched, press the seam open. 

how_to-make_a_waist_sash_3

With right sides together, fold the sash in half length ways and press. Pin along the long edge and stitch with a 1cm (3/8in) seam allowance. 

how_to-make_a_waist_sash_4

Use your fingers to roll the seam so that it is in the centre of the tube. Press the seam allowance open.

how_to-make_a_waist_sash_5

Turn back both short ends of the tube by 1cm (3/8in) and press.

TURN THE SASH

how_to-make_a_waist_sash_6

Take a safety pin or bodkin and attach it to one side of one of the short ends of the tube.

how_to-make_a_waist_sash_7

Feed the safety pin through the tube to turn the right side out. Press flat. 

how_to-make_a_waist_sash_8

Enclose the short ends of the sash, by stitching nice and close to the edge. Alternative, you could consider sewing by hand (with a slip stitch) to finish the ends invisibly.

Give the dress one final press and you are done!

How to : Sew a rolled hem with a standard foot

how_to_sew_a_rolled_hem_1.jpg

There are many ways you could choose to finish the hem of your Rushcutter.

You could use the hem facing, just like I did for VIEW A, you could use a strip of bias binding, or like me, you could do a rolled hem.

You can do a really narrow rolled hem, which can be a beautiful finish on fabrics like organza or chiffon, but I went for something a little wider as I'd say most people aren't sewing their Rushcutters from chiffon! This method will work with a narrower hem, if you want one.

I know there are a bizillion great machine feet which can help you get all kinds of finishes, but I do things the old school way, as a lot of my learning was done on an industrial machine without any fancy feet. So in tofay's tutorial, I will show you how to sew a rolled hem with a standard machine foot.

Stitch

how_to_sew_a_rolled_hem_2

With the dress inside out, using your fingers, turn up the hem by 5mm (1/8in) and stitch. If you go nice and slow you don't need to press and pin, and can just fold up the hem as you go.

Press

how_to_sew_a_rolled_hem_3

Turn the hem by a further 5mm (1/8in) and press. Pin hem in place.

Stitch

how_to_sew_a_rolled_hem_4

 Stitch along the original stitch line.

Press

how_to_sew_a_rolled_hem_5

Give the hem a good press on the right side of the garment, You will see that you have only one row of stitching on the right side.  


I'd love to know if you have any secrets for finishing hems! Let me know in the comments.


You may also like:

Posted on December 2, 2015 and filed under sewalong, sewing tutorials, the rushcutter.

How to finish an armhole with bias binding

how-to-finish-an-armhole-with-bias-binding.jpg

At this point in the Rushcutter Sew-along, our Rushcutter's are really starting to look like Rushcutters!

In today's post, we will be finishing the armholes with bias binding. I am a huge fan of binding as a finish, it gives you a lovely clean finish, without the extra bulk of a facing. 

Even if you are not sewing The Rushcutter, I am sure you will find this tutorial useful for projects to come!

Measure the armhole

how-to-finish-an-armhole-with-bias-binding_2

Take a tape measure and measure around the armhole. Take note of the measurement.

Prepare binding

how-to-finish-an-armhole-with-bias-binding_3

For this tutorial, you can use store-bought binding or make the binding yourself

Cut a piece of binding the length of your armhole.

If you are using binding that you made yourself, you will need to fold it before sewing. Take the binding and with right side down, press one long edge under by 10mm (5/8in).

Join binding

how-to-finish-an-armhole-with-bias-binding_4

With right sides together, bring the short ends of the bias binding together at a right angle. The overlap will create a square. 

how-to-finish-an-armhole-with-bias-binding_5

Pin in place and stitch across the diagonal of the square. 

how-to-finish-an-armhole-with-bias-binding_6

Trim back the seam, close to the stitch line, and press the seam open. 

Pin binding to armhole

how-to-finish-an-armhole-with-bias-binding_7

Now that the binding is in a continuous loop, with right sides together, pin the unpressed edge of the binding to one of the armholes, being careful to evenly distribute the binding around the armhole.

Be careful about where you place the binding seam - I suggest placing it somewhere where is there is not yet a seam, to minimise bulk (for example, the middle of the back armhole). 

Stitch

how-to-finish-an-armhole-with-bias-binding_8

Stitch the binding to the armhole with a 1cm (3/8in) seam allowance. 

Clip into the seam allowance at regular intervals. This will help you achieve a smooth armhole. Trim back the seam allowance by 2-3mm (1/16in) if your fabric is thick or bulky.

Understitch

how-to-finish-an-armhole-with-bias-binding_9

Turn the binding to the right side and, using your finger, press it (and the seam allowance) nice and flat. Understitch the seam allowance to the binding. 

Edge stitch

how-to-finish-an-armhole-with-bias-binding_10

Fold the binding to the inside of the dress, rolling the seam line towards the inside of the dress slightly (this is so you won't be able to see the seam line from the right side).

Give the armholes a good press, from the outside.

And tah-dah! You have a lovely clean finish on your armhole. 


You may also like:

How to : Join the bodice to the dress

how_to_join_the_bodice_rushcutter_1

If you are following along, you will know that over the last few weeks I have been guiding you through the process of sewing a Rushcutter dress. 

how_to_join_the_bodice_rushcutter_2

Today we will be joining the body of the dress to the bodice and your Rushcutter will really take shape. 

Pin

how_to_join_the_bodice_rushcutter_3

With wrong sides together, match the notch at the centre front of the FRONT panel to the notch in the centre of the CENTRE FRONT PANEL. Pin. 

Continue moving from notch to notch, pinning the two pieces together. Curved seams can be a little tricky, so you will need to use lots of pins!

Stitch the seam with a 6mm (1/4in) seam allowance, going nice and slow. Stop regularly to left the seam up and check that all the seams are lying flat and there is no puckering underneath. 

Trim seam

how_to_join_the_bodice_rushcutter_4

Trim back the seam allowance by 2-3mm (1/16in) and press the seam up towards the neckline.

Stitch

Fold the seam with right sides together, enclosing the raw edge within the seam. Press and pin. Stitch seam with a 6mm (1/4in) seam allowance.

Press

how_to_join_the_bodice_rushcutter_5

Press the seam down towards the hemline.

It is just a quick post today, as tomorrow we are up to binding the armholes, and I wanted to write that as a separate post, so it can be a tutorial you can look back on in projects to come!


You may also like:

Posted on November 30, 2015 and filed under sewalong, sewing tutorials, the rushcutter.

How to: Sew in-seam pockets with french seams

how_to_sew_pockets_with_french_seam_1

Over the past two days I have shown you how to prepare the bodice of your Rushcutter - View B. At this point we are up to putting in the in-seam pockets.

I just LOVE pockets, so I find a way to put them in pretty much every garment I make. Even a soft floaty dress like my Rushcutter.

If you're not as partial to a pocket as I am, you can simply attach the FRONT to the SIDE PANELS, ignoring the pocket all together. But if you are a fan of the pocket, well continue on with me today and I'll show you how to get a lovely finish with a french seam. And this method will work for other garments, not just The Rushcutter!

Place your pockets

how_to_sew_pockets_with_french_seam_2

Take 1 pair of pockets and, with wrong sides together, match the pockets to the notches on the FRONT. The notch in the centre of the pocket should be matched with the middle notch on the FRONT of the dress.

Pin pocket in place. Now, before sewing, I would suggest holding the panel up to your body, and checking how the pockets sit on your body. The top of the panel should sit just above your bust. If the pocket feels too low or too high, remove the pins and place the pocket in a more suitable location (this is when a toile really comes in handy). Measure the distance between the notch on the pocket and the notch on the dress, so that you will be able to place the other pocket pieces in the correct spot. 

Stitch one side of the pocket to the front

how_to_sew_pockets_with_french_seam_3

When you are happy with the pocket placement, stitch from the top of the pocket to the bottom, using a 6mm (1/4in) seam allowance. 

Repeat on the other side.

Trim back pocket seam allowance

how_to_sew_pockets_with_french_seam_4

Trim back the seam allowance by 2-3mm (1/16in), from the top of the pocket to the bottom, leaving the rest of the seam untrimmed, on both sides.

Open the seam, and press the seam allowance towards the pocket. 

Create a french seam

how_to_sew_pockets_with_french_seam_5

Fold the pocket back towards the dress, now with right sides together, enclosing the raw edge and the original row of stitching inside the fold. Once again, stitch from the top of the pocket to the bottom with a 6mm (1/4in) seam allowance. Repeat for the other side. 

Stitch pocket to side panel

how_to_sew_pockets_with_french_seam_6

Now take the remaining pair of pockets and match them to the SIDE PANEL pieces with wrong sides together, once again matching up the centre notches. If you changed the placement of your pockets on the front, make sure you do the same for the pockets being attached to the side panels. Pin in place and attach using the same method we used for the first side.

Join the front to the side panel

how_to_sew_pockets_with_french_seam_8

Press all 4 pocket bags away from the panel they are attached to. 

With wrong sides together, pin the SIDE PANEL to the FRONT on both sides. Pin up the seam, around the pocket, and then continue pinning the remainder of the seam.

how_to_sew_pockets_with_french_seam_9

Stitch the pieces together with a 6mm (1/4in) seam allowance. You will notice that, when you approach the pocket, your stitching line does not meet up with the seam between the body of the dress and the pocket. This is how it is supposed to look, they will match up when you sew your second row of stitching. 

Clip into corners

how_to_sew_pockets_with_french_seam_10

Clip into the corners between the pocket bag and the body of the dress, getting nice and close to the row of stitching, but being careful not to cut through. 

Trim back the whole seam by 2-3mm (1/16in).

Press seam

how_to_sew_pockets_with_french_seam_11

Turn the pieces inside out, and press the seam flat. Pin and then and stitch along the seam, with a 6mm (1/4in) seam allowance enclosing the raw edge inside the seam. 

Attach the back

how_to_sew_pockets_with_french_seam_12

Attach the BACK to the side panels with a french seam. Use the notches to help you position the pieces correctly. Press the finished seams towards the front of the dress.

So that brings us to the end of this post! Tomorrow, the Rushcutter will really start looking like a dress as we will be joing to the bodice to the body of the dress. Yay!


You may also like:

How to : Finish a neckline with bias binding

how_to_finish_neckline_bias_binding_1

Binding necklines and armholes can create a lovely clean and professional finish. It minimises bulk and can be a perfect finish for lightweight or transparent fabrics that you would be able to see a facing through.

Earlier in The Rushcutter sew-along, I showed you how to make your own bias binding, so head back there if you think you would prefer to make your own binding instead of buying the pre-made stuff. 

Measure the neckline

To start, measure the length of the neckline of your dress. Take note of the measurement. 

Cut a piece of binding the length of your neckline plus 2cm (3/4in) - this extra 2cm will account for the raw edge at each end that need to be turned under, to achieve a clean finish. 

Press the bias tape

how_to_finish_neckline_bias_binding_2

Lay the binding face-down and press one of the long edges under by 10mm (3/8in). If you are using a different width of binding, fold up by a third of the total width. 

how_to_finish_neckline_bias_binding_3

Fold back both short edges by 1cm (3/8in) and press.

Pin

how_to_finish_neckline_bias_binding_4

With right sides together, align the fold on the short edge of the binding with the centre back of the UPPER BODICE. Pin the unpressed edge of the binding to the neckline. 

how_to_finish_neckline_bias_binding_5

Continue pinning the binding around the neckline (being careful not to stretch it) until you reach the centre back on the opposite side. Check that the fold on the short edge matches up with the centre back seam. If it doesn't, you will need to adjust it, until it sits correctly.

Stitch

how_to_finish_neckline_bias_binding_6

Stitch the binding to the neckline with a 1cm (3/8in) seam allowance. Clip into the seam allowance at regular intervals. This will help you create a smooth neckline when you fold the binding to the inside of the dress. If you are using a thick or bulky fabric, you can trip down the seam allowance by 2-3mm (1/16in).

Understitch

how_to_finish_neckline_bias_binding_7

Using your finger, press the binding (as well as the seam allowance) nice and flat, with the seam allowance pushed towards the binding. Understitch the seam allowance to the binding. This will help the binding roll to the inside of the garment.

Press and pin

how_to_finish_neckline_bias_binding_8

Fold the neck binding to the inside of the dress, rolling the seam line towards the inside of the dress slightly. This will give you a nice clean finish, and will  prevent the stitch line from being seen on the right side of the dress. With the raw edge of the binding still folded under, press the binding flat around the neckline, and pin in place.

Edge stitch

how_to_finish_neckline_bias_binding_9

Stitch along the folded edge of the binding and then press to remove any wrinkles. 

Baste the placket in place

how_to_finish_neckline_bias_binding_10

The final step, before we are ready to move onto the body of the dress, is to join the UPPER BODICE at the centre back.  With right sides out, lay your bodice face down. Place the button stand on the right-hand side on top of the left-hand button stand, lining up the folded edge with the stitch line underneath. 

how_to_finish_neckline_bias_binding_11

Make sure that the edge of the button stand just covers the line of stitching unerneath . Use a pin to hold the button stands in position and make a short horizontal row of stitches 6mm (1/4in) from the bottom to hold in place. 

That's all for today, tomorrow I'll be showing you how to sew the inset pockets with a french seam!


You may also like:

Posted on November 24, 2015 and filed under sewalong, sewing tutorials, the rushcutter.

The Rushcutter sew-along: View B begins!

the_rushcutter_bodice_french_seams_1

Today it's finally time to jump into The Rushcutter - View B sew-along, after concluding the sew-along for View A last week. 

I decided to construct this version with french seams, so that I could offer an alternative finish for those sewers who don't own overlockers, and because French seams are oh-so-nice! If you are not making The Rushcutter, but would like to learn how to sew a french seam, then keep reading. 

French seams are a good choice for you (even if you do have an overlocker), if your fabric is light to mid-weight. You get a lovely clean finish, which gives your garments a really high-end look. If you would prefer normal seams, just follow along, remembering to put right sides together (not wrong sides together, which is how you go about creating a french seam).

joining the front and back bodices

(sizes A & B only)

the_rushcutter_bodice_french_seams_2

For sizes C - K, the front and back bodice pieces are all-in-one. This was not possible for size A and B, because the armhole is not big enough to allow it, so these pattern pieces need to be cut and stitched together before following along with the instructions for all sizes,

With wrong sides together, attach the FRONT UPPER BODICE to the BACK UPPER BODICE and stitch together with a french seam (if you don't know how to sew a french seam, don't worry - I'll explain it in the following steps).

Preparing the button placket

the_rushcutter_bodice_french_seams_3

Place the UPPER BODICE face down, and fold back the centre back by 1cm (3/8 in), using the notches to guide you. Press in place.

the_rushcutter_bodice_french_seams_4

Make a second fold, this time 2cm (3/4 in) from the first, using the notches as a guide. Press in place.

adding interfacing

the_rushcutter_bodice_french_seams_5

If your fabric is lightweight, or quite flimsy, I suggest that you consider using interfacing to stiffen your button placket. I did not want to stiffen the whole stand, so decided to just use small pieces of interfacing to reinforce where the buttons and buttonhole will be sewn.You could consider cutting a strip of interfacing as long and as wide as the placket itself - depending on the fabric and finish you are going for. 

Open up the folds, and place your piece/s of interfacing with sticky side down. The folds will help you position it correctly. Press in place. 

the_rushcutter_bodice_french_seams_6

Re-fold the fold lines and stitch close to the edge on both sides. Your pattern placket is done!

Attaching the centre front panel

the_rushcutter_bodice_french_seams_7

With wrong sides together, join the CENTRE FRONT PANEL to the front sides of the UPPER BODICE pieces. Use the notch in the centre of the seam to help you place the pieces correctly. Stitch with a 6mm (1/4in) seam allowance.

the_rushcutter_bodice_french_seams_8

Trim down the seam allowances on both sides of the CENTRE FRONT PANEL by about 2-3mm (1/16in). Open the seam, and press the seam allowances away from the centre front.

the_rushcutter_bodice_french_seams_9

Fold the seam, with right sides together. You will see that this will enclose the raw edge and the original line of stitching inside the seam. Press and pin. Stitch the seam with a 6mm (1/4in) seam allowance. 

the_rushcutter_bodice_french_seams_10

Press seams away from the centre front. 

Joining the shoulder seams

the_rushcutter_bodice_french_seams_11

With wrong sides together, pin the front and back shoulder seams together. Pin in place.

Once again, stitch with a 6mm (1/4in) seam allowance, trim back, and enclose raw edge in a french seam.

the_rushcutter_bodice_french_seams_12

Press the shoulder seams towards the back, and then that's it for today.

Tomorrow I'll be walking you through using bias tape to bind the neckline.

Don't have bias tape? Make some yourself! 


You may also like:

Posted on November 23, 2015 and filed under sewalong, sewing tutorials, the rushcutter.

Finished project : The Rushcutter

the_rushcutter_1

At last, after about four weeks of blog posts, I have completed the sew-along for The Rushcutter (view A)! Before getting on with view B, I thought I'd finally show you some pics of my finished Rushcutter.

the_rushcutter_2

I have made so many versions of this dress, throughout the design process, but this one is my absolute favourite. It is an easy one to just throw on and look put together, and I can easily dress it up or down. It has already become an absolute wardrobe staple!

It's made from a lovely mid-weight denim which I bought second hand (so unfortunately don't have any more details about it). I was a little worried it might be a little too heavy for a Rushcutter, but decided to go with it anyway as it has a clear right and wrong side, which is really great when photographing sewing tutorials. 

the_rushcutter_3
the_rushcutter_4

I got a lovely surprise when I finished making it, as I absolutely love the silhouette the denim creates. It's lovely and boxy and really shows off the details in the pattern.

the_rushcutter_5

I have worn it a lot this spring with a pair of sandals, but also got a lot of wear out of it at the end of winter with tights and brogues. The weather has been awful here in Sydney, so I think I will still get a few more wears out of it before the year is out.

the_rushcutter_6
the_rushcutter_7
the_rushcutter_8
the_rushcutter_9

I couldn't resist finishing up with this funny photo. This is my suspicious glance to see who was about to come and ruin my photo shoot!

Stay tuned, as next week I will be starting on the tutorial for view B of the Rushcutter (the sleeveless version).

Posted on November 22, 2015 and filed under sewing inspiration, sewing patterns, the rushcutter.

The Rushcutter sew-along: The finishing touches

finishing-touches_the_rushcutter_1.jpg

So we are almost there! By now your Rushcutter should be really be looking like a dress. All we have got left to do is to finish the neckline and do the hems.

Finishing the neckline

Now that the zip is done, you can finish the neckline.

finishing-touches_the_rushcutter_2

With the dress inside out, fold the binding to the inside of the dress, rolling the seam line slightly towards the inside too. Make sure the raw edge is folded under, and press in place.

finishing-touches_the_rushcutter_3

Pin the binding around the neckline, using your fingers to smooth out the binding.

finishing-touches_the_rushcutter_4

When you reach the zip, make sure that the short edge of the binding sits a few milimetres away from the zip teeth. 

finishing-touches_the_rushcutter_5

Stitch along the edge of the binding. Press to remove any wrinkles.

Hem the sleeves

finishing-touches_the_rushcutter_7

With the neck done, move onto the sleeve hem. With the dress still inside out, fold back each sleeve hem by 4cm (1 1/2in). Press and pin in place. 

finishing-touches_the_rushcutter_8

Stitch the hem in place, by stitching close to the edge. 

Prepare the hem facing

finishing-touches_the_rushcutter_9

Take the FRONT and BACK HEM FACING and, with right sides together, pin them together at the side seams. Stitch with a 15mm (5/8in) seam allowance. These seams will be enclosed in the hem, so do not need to be finished.

finishing-touches_the_rushcutter_10

Press both seams open.

finishing-touches_the_rushcutter_11

Finish the top edge of the facing (the edge that will not be attached to the hem of the dress). Consider using a contrasting binding for an interesting inner detail. 

Attach the hem facing

finishing-touches_the_rushcutter_12

Pin the hem facing to the dress, with right sides together. Start at the centre front notch and work way around the facing, matching each seam line with the corresponding notch. Stitch with a 1cm (3/8in) seam allowance.

finishing-touches_the_rushcutter_13

Trim back the seam allowance of your hem facing, to minimise bulk in the hemline.

finishing-touches_the_rushcutter_14

Lay the seam flat and, with the seam allowances pushed towards the hem facing, understitch the seam allowances to the facing.

finishing-touches_the_rushcutter_15

Turn the hem facing to the inside of the dress, being sure to roll the seam line slightly to the inside, and press.

finishing-touches_the_rushcutter_16

Stitch the hem in place, by hand or machine, close to the end of the facing.

Give the dress one final press and you're done! Wooohooo! 


You may also like:

Posted on November 20, 2015 and filed under sewalong, sewing tutorials, the rushcutter.

How to sew an invisible zip

how_to_sew_an_invisible_zip_1

Zip time! And before some of you run away screaming, please just give it a go with me. I promise they're not that scary. 

Invisible zips really are the easiest zips to sew, and if you go nice and slow, you can get a really nice finish that I promise you will be proud of.

Finish the back opening

Try on the dress and adjust the back opening, if necessary.

Finish both sides of the back opening.

how_to_sew_an_invisible_zip_2

Lay the dress right-side down and fold up the centre back seam allowance on both sides of the opening by 20mm (3/4in) and press flat.

Press the zip

how_to_sew_an_invisible_zip_3

Open the invisible zip, and using a warm dry iron, press the zipper teeth flat. This will help you get nice and close to the teeth when you sew in the zip.

Pin and baste the zip

how_to_sew_an_invisible_zip_4

Place the zip face down on the right hand side of the dress. Align the stop at the top of the zip with the neckline and the teeth of the zip with the pressed seam line. Pin in place.

how_to_sew_an_invisible_zip_5

Now this is the step that really makes all the difference. Take a needle and thread (I always use a contrasting thread because it makes it nice and easy to remove the stitches later), and hand baste the zip tape to the dress. It takes a couple of minutes extra to do this, but it will ensure that the zip does not shift while you are sewing it in - and I prefer hand stitching to unpicking any day! When the zip is attached, remove the pins.

Sew one side of the zip

how_to_sew_an_invisible_zip_6

Using an invisible zip foot, insert the teeth of the zip into the right-hand channel of the foot. Using your finger, roll the zip teeth so that the zip lies as flat as possible. Slowly stitch down the length of the zip, stopping just before you hit the zip pull.

how_to_sew_an_invisible_zip_7

Close the zip and turn the seam allowance under, so that the zip lies flat. Press the fold. 

Matching the seam line

how_to_sew_an_invisible_zip_8

You will have noticed that the seam that joins the sleeves to the body of the dress, runs directly through the zip. To ensure the seam lines match up on either side of the zip, take a pin and put it through the zip tape (on the side not yet sewed) in line with the horizontal seam line.

how_to_sew_an_invisible_zip_9

Open the zip and place the zip tape face down on the left hand side of the back opening, aligning the pin with seam line.

You can use this same method for matching up waistbands, or waistlines on dresses.

how_to_sew_an_invisible_zip_9

Stitch the second side of the zip

Pin in place and then continue pinning the remainder of the zip tape (once again aligning the zip teeth with the pressed line). Baste the zip in place by hand.

how_to_sew_an_invisible_zip_10

Stitch the second side with your invisible zip foot - this time with the zip teeth in the left channel.

Admire your work

how_to_sew_an_invisible_zip_11

Close the zip and give it a good press. Look at those lovely matching seams! Worth it, right?

Finish the centre back seam

how_to_sew_an_invisible_zip_12

Turn the dress inside out and pin the remainder of the centre back opening closed. Make sure you keep the ends of the zip tape out of the way.

how_to_sew_an_invisible_zip_13

Using an ordinary zip foot, stitch the remainder of the centre back seam closed. Start by putting the needle into the fabric where the row of stitching for the zip ends (or as close to that as you can get) and then lower the foot before continuing down the seam with a 2cm (3/4in) seam allowance. 

Remove the basting stitches

how_to_sew_an_invisible_zip_14

With the dress still inside out, press the centre back seam open. At this stage you can remove the basting stitch from the zip tape.


And you're done! Not so bad, right?


You may also like:

How to finish a neckline with bias binding

binding_neckline_1.jpg

In yesterday's post in The Rushcutter sew-along, I showed you how to make your own bias tape, and today I am going to show you how to attach  the binding to the neckline. This method will also work if you are using store-bought binding, and will work on other sewing patterns that ask for a bound neckline and have a centre-back opening.

Measure the neckline of your garment

binding_neckline_2

Using a tape measure, measure around the neckline of your Rushcutter. Start measuring from the centre back on one side, and continue measuring around the neckline until you reach the centre back on the other.

Prepare bias binding

binding_neckline_3

Cut a piece of bias binding a couple of centimetres (1 inch) longer than your neck measurement. If your binding is not yet folded, place it face down and press one long edge of the binding under by 10mm (5/8in). 

Pin binding to neckline

binding_neckline_4

With right sides together, pin the binding to the neckline (pinning the edge that has not been folded), starting from the centre back and slowly working your way around the neckline. If you have two folds in the binding, that is totally fine. I just save time by only folding in one edge and then using the seam guide on my machine to achieve the correct seam allowance.

binding_neckline_5

Before sewing, turn the dress  over and check that all seams (and darts) are pressed the right way.

Stitch binding to neckline

binding_neckline_6

Stitch the binding to the neckline with a 1cm (3/8in) seam allowance. 

binding_neckline_7

Trim any excess binding from the centre back, so that the edge of the binding sits flush against the centre back on both sides.

Trim and clip

binding_neckline_8

Trim down the seam allowance by 5-6mm (1/4in). This will minimise bulk around the neckline, and help when turning the seam allowance to the inside of the dress. You can also clip into the seam to help it sit flat.

Understitch

binding_neckline_9

Using your finger, press the binding (and seam allowance) nice and flat, and understitch the seam allowance to the binding. This will help the binding to roll to the inside of the garment so that you won't see it poking out on the right side. 

We will leave the binding like that for the moment, as before we can finish it off we need to sew in the zip - so that's what we'll be doing tomorrow!


You may also like:

Assembling The Rushcutter (view A)

Yesterday I showed you how to sew the darts on the raglan sleeve, in The Rushcutter sew-along, so today it's time to assemble the sleeves and get the sleeves and dress sections connected. By the end of this post, it will really start looking like a dress!

Attach the centre front panel

With right sides together, pin the CENTRE FRONT PANEL to the front side of each SLEEVE, matching the centre notches. Sew each seam with a 15mm (5/8in) seam allowance, and finish the raw edges.

Press the seams away from the centre front. At this stage, you can also press your darts towards the back.

Sew the sleeves

Finish the bottom edge of both sleeves. Then, with right sides together, fold the sleeve so that you can sew the underarm seam. Pin and stitch with a 15mm (5/8in) seam allowance.

Finish the raw edges separately and press open. 

Pin the sleeves to the dress

With right sides together, match the notch at the centre of the FRONT to the notch in the centre of the CENTRE FRONT PANEL.

I found getting the sleeves out of the way, by turning the sleeves to the right side, helped me when pinning this seam.

Move next to the seam that connects the sleeve and the centre front panel, and match it to the corresponding notch on the front of the dress. 

Continue moving from notch to notch until you reach the centre back. 

As you are matching two different shaped curves together, you will need to be really careful to match up all your notches correctly. 

Match up all the notches and seams on the second side, and then fill the gaps between notches with more pins to get a nice flat seam.

Sew the sleeves to the dress

Stitch the seam with a 12mm (1/2in) seam allowance. Go nice and slow, and lift the seam regularly to check that all the seams are lying flat and that there is no puckering on the underside of the seam.

Press

Before finishing the seam, open the seam and check that it is smooth and there is no puckering. If there is, just unpick a few centimetres (or as much as you need to get the seam to sit flat) either side of the puckers and then pin and re-stitch. 

Finish the seam and press up towards the neckline. Press from both the right and wrong side, to ensure that you get a nice flat finish. 


And that's it for today, is your Rushcutter starting to resemble a dress now?


You may also like:

Posted on November 11, 2015 and filed under sewalong, the rushcutter.

How to sew shoulder darts in a raglan sleeve

how_to_darts_raglansleeve_1

Yesterday we finally started sewing our Rushcutters! We assembled the lower part of the dress, but before we can go any further, we need to get our sleeves started.

The shoulder dart

The darts are slightly different, depending on what size pattern you cut.

how_to_darts_raglansleeve_2

For sizes A - F, the dart looks like this.

how_to_darts_raglansleeve_3

While for sizes G - K, the centre of the dart has been cut out - this is to minimise bulk in the dart.

When complete, both versions will look the same on the right side of the sleeve.

Sewing the dart  (sizes A - F only)

how_to_darts_raglansleeve_4

Take your sleeve and, with right sides together, fold along the centre of the dart, matching up the notches at the neckline and ensuring that the dart point is at the centre of the fold. Press and pin in place.

how_to_darts_raglansleeve_5

Stitch the dart from top to bottom, stitching 15mm (5/8in) beyond the dart point. I generally stitch darts by eye, but if this is not for you, then you can mark the stitching line on your fabric with a fabric pen, tailors chalk, or even with a line of hand stitching (if your fabric is delicate).

Sewing the dart  (sizes G - K only)

how_to_darts_raglansleeve_6

For the open dart, you can either stitch the dart and then just finish the raw edge of the dart (with overlocking or a zig-zag stitch) or, if you are using a light to midweight fabric, I would suggest using a french seam, to get a really nice clean finish.

To do this, fold the sleeve with wrong sides together, along the centre of the dart. Match the notches at the neckline, and check that the dart point is at the centre of the fold. Press and pin along the raw edge.

how_to_darts_raglansleeve_7

Stitch along the raw edge with a 6mm (1/4in) seam allowance. 

how_to_darts_raglansleeve_8

Trim back the seam allowance by 2-3mm (1/16in). This step is really important, because you want this edge to be hidden cleanly in the next seam you sew.

how_to_darts_raglansleeve_9

Open the sleeve and press the seam allowance towards the front of the sleeve.

how_to_darts_raglansleeve_10

With right sides together this time, re-fold the dart, matching the darts at the neckline, and also checking that the dart point is at the centre of the fold. Press and pin in place.

how_to_darts_raglansleeve_11

Stitch the dart, from top to bottom, using a 6mm (1/4in) seam allowance, stitching 15mm (5/8in) beyond the dart point.

Repeat process for the other sleeve. And that's it, shoulder darts are done!

Tomorrow we will continue assembling the top section of the Rushcutter (View A).


Do you have any special tricks you use for sewing darts?


You may also like:

The Rushcutter sew-along : How to sew the pockets (view A)

therushcutter_sewalong_pockets_1

Welcome back to The Rushcutter sew-along.

Yay! After all that preparation, it is finally time to start sewing. 

In today's post, I'll be guiding you through the first few steps of The Rushcutter (View A). We'll be preparing our pockets, stitching them to the side panels, and then attaching our front and back.

Prepare the pockets

therushcutter_sewalong_pockets_2

Take your SIDE POCKET pieces, and finish the top edge of both pieces. Consider using an overlocker, zig-zag stitch, binding, or even folding the raw edge under by 1cm. The best finish for you will depend on your chosen fabrication.

therushcutter_sewalong_pockets_3

There is a notch on either side of the pocket, 4cm (1 1/2in) from the finished edge. You will be using these notches to help you fold back the pocket hem.

therushcutter_sewalong_pockets_4

With the pocket face-down, fold back the top of the hem by 4cm using the notches to guide you.

Press and pin.

therushcutter_sewalong_pockets_5

Sew along the edge to secure the hem in place. I used the edge of my overlocking as a guide to keep my stitching straight. If you are using a striped fabric, consider sewing your hem from the right side, so that you can follow a stripe, and get the line of stitching in exactly the right place.

Attach pocket to side panel

therushcutter_sewalong_pockets_6

Work out which pocket is for your right side and which is for your left, by checking the notches. Double notches indicate the back of the panel, and a single notch indicates the front. 

therushcutter_sewalong_pockets_7

With right-sides facing up, place the SIDE POCKET on top of the SIDE PANEL, matching the double notch on the pocket with the double notch on the side panel, and the single notch on the pocket with the single notch of the side panel. This ensures that the right pocket is matched with the right side panel. Pin in place.

You will notice that the pocket is slightly wider than the panel it will be stitched to. This is how it is meant to be! The pocket piece is designed to be a little wider, to create a bit of shape and volume in the pocket. 

Stitch around the edge of each pocket, using a 6mm (1/4in) seam allowance. This stitching is just to hold the pocket in place for when you attach the front and back pieces to the side panel. This stitching will be hidden within the seam allowance. 

Attach the front

therushcutter_sewalong_pockets_8

With right sides together, pin the SIDE PANELS to either side of the FRONT. Use the notches to guide you - especially if you are using a slinky fabric that is prone to stretching when cut on the bias! Check that you are attaching the edge of the SIDE PANEL that has single notches. Stitch each seam with a 15mm (5/8in) seam allowance, and finish the seam.

Attach the back

therushcutter_sewalong_pockets_9

With right sides together, pin the open side of each SIDE PANEL to the corresponding BACK PANEL (you will know which one is which by looking at the notches). Stitch seams with a 15mm (5/8in) seam allowance. Finish the seam.

Press

therushcutter_sewalong_pockets_10

Press the seams away from the SIDE PANEL. The seam allowances should match up nicely with the curve.

Well that's all for today! Tomorrow we will be getting onto the sleeves, so stay tuned.


You may also like:


Posted on November 9, 2015 and filed under sewalong, the rushcutter.

The Rushcutter Sew-along: Cutting your fabric

the_rushcutter_sew_along_cutting

So it's finally time to cut out our Rushcutters!

If you are sewing a long with me, by this stage you should have gathered your supplies, picked your size,  printed your pattern, made a toile and made any necessary adjustments. Now that much of the hard work is done, it's time for the fun(ner) stuff!

Prepare your fabric

Grab you fabric (that you have pre-washed, dried and pressed) and lay it out on a flat surface. I won't judge you if your only flat surface is on the floor! I went years without a proper cutting table and I managed just fine - so use whatever space you can.

Cutting flat vs cutting on the fold

Generally speaking, most patterns ask you to fold your fabric lengthways, matching selvedge to selvedge, so that you can cut a piece once and get a pair. This is the most time efficient method (and what I included in the pattern's instructions), but I must say that I generally cut flat.

By cutting flat, you get much more control, which is especially good if you are using a placement print or matching a print or stripes.

Cutting_flat-vs-on-fold_the_rushcutter.png

The other bonus is that you use much less fabric. Above, I have shown the suggested lay plan for View A on 115cm (45in) wide fabric. By cutting flat, instead of on the fold, you could save almost 1 metre (the saving is not so big when using 150cm wide fabric - about 30cm). So if you are tight on fabric, or have a bit of extra time up your sleeve, then I recommend giving it a go. 


Pattern piece inventory

the_rushcutter_VIEW-A.png
 
the_rushcutter_VIEW-B.png

View A

Front - cut 1 on fold

Back - cut 1 pair

Side panel - cut 1 pair

Side pocket - cut 1 pair

Centre front panel - cut 1

Front hem facing - cut 1 on fold

Back hem facing - cut 1 on fold


View B

Front - cut 1 on fold

Back - cut 1 on fold

Side panel - cut 1 pair

Centre front panel - cut 1

Front upper bodice (size A and B only) - cut 1 pair

Back upper bodice (size A and B only) - cut 1 pair

Upper bodice (sizes C - K only) - cut 1 pair

In-seam pocket - cut 2 pairs

Optional

Waist sash - cut 1 pair

Cutting tips + suggestions

If you are using a heavy weight fabric, consider cutting your in-seam pockets (View B) in a lighter weight fabric. You could also consider a lighter fabric for the neckline / armhole binding.

You may also want to use consider adding interfacing to your hem facings - if you would like to add weight to the hem. 

Cutting your fabric

After working out what pattern pieces you require, cut loosely around the pattern pieces. This will make them much easier to handle, and give you more flexibility when working out the best cutting layout. 

If you are cutting on the fold, fold your fabric lengthways, with right sides together, matching your selvedges. You may notice that I cut my pattern with wrong sides together. This is because I was planning to make my dress with the wrong side of the fabric on the outsidem but changed my mind at the last minute!

cutting_the_rushcutter_1
cutting_the_rushcutter_2

1. Place your pattern on the fabric, and measure the distance between one end of the grainline and the selvedge. Hold this side in place with a weight or pin.

2. Measure the distance between the other end of the grainline and the selvedge, and pivot until it is the same distance as the first side. 

cutting_the_rushcutter_3
cutting_the_rushcutter_4

3. Use weights (or whatever you have got lying around) to hold the pattern in place, and use pins to hold in place. 

4. Cut around the edge of the pattern, being very careful to get as close to the line as possible.

Cutting notches

cutting_the_rushcutter_6
cutting_the_rushcutter_7

When the piece is cut, work your way around the pattern, cutting into each notch. The notches are 6mm - try not to cut them any longer as you may risk getting too close to the stitching line. Be careful to find them all - they really do help when making sure you are putting the correct pieces together!

Marking the dart point

There are a number of ways to mark the dart point, and the best option will depend on the fabric you are using.

cutting_the_rushcutter_8
cutting_the_rushcutter_9

1. If you are using something stable, or dark in colour, fabric chalk or fabric pen will work fine.

2. Mark the dart point on one side of the fabric, and then put a pin through the point so that it comes out the other side. Make sure the pin is nice and straight, and then mark the dart on the other side with chalk.

cutting_the_rushcutter_10
cutting_the_rushcutter_11

3. If your fabric is a little more delicate or prone to moving, use a needle and contrast thread to put one long stitch through both layers of fabric at the point of the dart. Tie a knot at wither end of the thread.

4. Open up the two pieces and cut the thread in between. Now you can tie a knot on either side so that the stitch remains in place.


Do you cut the old-school way like me? Or are you a rotary cutter kind of gal (or boy)?


You may also like:

Posted on November 4, 2015 and filed under sewalong, the rushcutter.

The Rushcutter sew-along: more pattern alterations

the_rushcutter_pattern_alterations

In yesterday's post, I showed you a few alterations that you may want to make to The Rushcutter: lower the neckline, add or removing volume, shortening and lengthening the pattern.

Today I have a follow on post for you, as I was worried I might intimidate you if I put all the alterations in the one post!

Create a slimmer Rushcutter

The Rushcutter sewing pattern is designed to be over-sized, so there is a lot of ease in it. It may be a little too much for some of you, so, in today's post, I will show you how to slim down the dress a little. It is not overly complicated, but is slightly more difficult  than it would be on a more conventional pattern, as it does not have side seams!

I would suggest, before making any major adjustments to the pattern (like this one) make a toile, so you know exactly how much width you can afford to remove from the pattern.

1. To start, take the 'Side Panel' pattern piece. This is where we will be removing some width from the pattern piece. The grainline, which runs right through the middle of the pattern piece (and therefore down the side of the body) is where you will be removing the fabric from.

2. Work out how much you would like to remove, by referring to your toile. You will want to take the amount evenly from both sides of the dress. Divide the total amount by 2 and then distribute this measurement either side of the grainline (on the stitching line) - half on the front section  of the pattern piece (indicated by the single notches) and half towards the back (indicated by the double notches).

3. Cutting from the top, cut along the grainline, down towards the hemline. Do not cut all the way through the pattern. Stop a 2-3mm from the bottom, so that a small "hinge" of paper remains intact. You will now notice that you can separate the two sides of the pattern quite easily, without detaching them entirely. 

4. Now, swing one side of the pattern over the other (doesn't matter which one) until the points that you marked overlap. You will see that, by doing this, you have removed a slice from the middle of the pattern. Tape (or glue) in place.

5. By taking out this slice, the underarm curve will now come to a sharp point. Redraw the stitch line and the cutting edge, with a nice smooth line, to correct this. 

Now that you have removed some width from the side panel, you will need to remove the same amount from the raglan sleeve - as these two pieces are sewn together. 

1. Remember the amount we distributed either side of the grainline on the side panel? Take this measurement and divide it by 2. Measuring in from the underarm seam (remember to measure from the stitch line, if your pattern still includes seam allowance), marking a point the distance determined. Repeat for the second side.

2. Draw a line from the points marked, down towards the hemline, meeting with the original stitch line, at the line that indicates where to fold up the sleeve hem.

3. Redraw the cutting line, by adding 1.5cm seam allowance to the new line.

Re-draft the pocket

You may decide to make a short version of the Rushcutter. Megan, one of my lovely testers, decided to shorten hers to tunic length. Nice, right? The only problem is that you end up losing quite a bit of pocket depth. The easiest way to solve this is to simply re-draft the pocket piece, so that it will be your desired depth.

I will show you how I drafted the original pattern piece, so your new pattern will fit perfectly, just like the original!

the_rushcutter_altering_the_pocket_1

1. Work out how deep you would like to make the pocket, you can do this by referring to the original pattern piece, or by holding the 'Side Panel' pattern piece up to your side and marking where you would like the pocket to start. Mark the point on the grainline of your pattern piece.

2. Draw a line, perpendicular to the grainline, from the marked point. Extend the line 5mm past stitching line on both ends (this is because the pocket panel was drafted to be slightly wider than the piece it is stitched to, to add a little volume).

3. Starting at one endpoint, draw a straight line that meets the bottom corner of the pattern piece, easing back into the original stitch line. Repeat for the other side.

the_rushcutter_altering_the_pocket

4. Take a seperate piece of paper and trace a copy of the new pattern piece, being sure to also transfer grainline and notches onto the new pattern piece.

5. Add seam allowance to both sides and the hem (not the top edge, just yet). The seam allowance needs to be 1.5cm on each side and 1cm at the hem. 

6. Draw a line that runs parallel to the top edge of the pocket, 4cm above the original line. Fold along the top edge of the pocket.

7. Trace the seam lines onto the pocket hem (you want to do this so that when the piece is cut, and you fold the top hem of the pocket back to finish the edge, it meets the pocket smoothly).

8. You now have your pocket piece! Add markings and get sewing!

Relocating the shoulder dart

After trying on your toile, you may feel that the dart does not quite sit on your shoulder. If this is the case, you may want to move the dart slightly forward or backwards, from its original position.

move_a_dart_raglan_sleeve_1
move_a_dart_raglan_sleeve_2

1. Work out where your dart needs to be (by measuring in relation to the original dart) and draw a straight line running from the new location on the neckline, to the original dart point.

2. Focusing on the original dart, cut down the outside dart arm, from the neckline to the dart point. Don't cut all the way to the end, stop when you are 2-3mm away. Do the same with the line you just marked, also stopping a few millimetres from the end. This will create a small 'hinge,' which allows you to move this section of the pattern, whilst still keeping the pieces attached.

move_a_dart_raglan_sleeve_3
move_a_dart_raglan_sleeve_4

3. Rotate the cut section until you have closed out the original dart (one dart arm overlaps the other), and tape in place.

4. You will now see that you have opened up a new dart. To complete it, you will need to add dart shaping, and seam allowance to the new dart.


Okay, thats it for today's post. And guess what, tomorrow it's finally time to cut some fabric! Yippee! Let me know if there is an alteration that I didn't include in today or yesterday's post that you need!


You may also like:

Transferring pattern changes from toile to pattern

transferring_pattern_changes_toile_to_pattern

Last week I showed you how to make a toile, and what you should be looking for when fitting. In today's post, I will show you how to transfer changes from toile to pattern.

Lowering the neckline

The first change that I will show you is how to lower the neckline of The Rushcutter. I am all about the high neck on this dress, but I understand that it's not for everyone. If you'd prefer it to be slightly lower (or even drastically lower) it's not a difficult alteration to make. 

To start, take the sleeve pattern and the centre front panel pattern piece, and put them together. Place one sewing line over the other, so you can see how the pieces fit together when they are sewn. You will notice that on The Rushcutter sewing pattern, both the stitching line and the cutting line are marked, so that making pattern alterations is a little simpler. 

Work out how much you would like to lower the neckline by, by taking the measurement from your toile (measuring down the centre front) and mark it on your pattern piece. Make sure you measure it from the stitch line rather than the edge of the pattern. For the example, I only lowered the neckline at the front, but if you would also like to lower the neckline at the back, place a mark on your centre back too.

Before redrawing the neckline, you will need to fold the dart (so you can get the neckline all in one piece). The easiest way to do this is by placing the dart point on the corner of the table like this. The dart fullness should be folded towards the back.

Starting at the point you marked on the centre front, re-draw the neckline with a smooth curve, gradually easing back into the original neckline (unless you are also lowering the neckline at the back, in which case you will want your new neckline to meet with the point you marked on the centre back).

Before unfolding the dart, take a tracing wheel and trace over the new neck curve at the dart. This will transfer the correct neck shaping onto your dart. If you need some extra help with this, check out this tutorial. You will now just need to add seam allowance to the neckline and you are good to go!

Add or remove volume

The next thing I'm going to show you is how to use the cut and spread technique to add or remove volume from The Rushcutter. You may want to use this technique on the body of the dress, or maybe even the sleeve. 

If you have never used the method of cutting and spreading before, this example will basically show you how to do it. If you want to see it in more detail, check back on the blog later this week, as I am planning to do a post on this technique.

Pattern alterations are much easier to manage if your pattern does not have seam allowance. Remove the seam allowance from the pattern you are altering, or trace a copy of the pattern piece without seam allowance. This is really easy to do with The Rushcutter pattern as the stitch line is marked for you.

1. Draw two vertical lines through the pattern, which will cut the pattern into three equal-ish parts (this does not have to be exact).

2. Starting with one of the lines, cut up from the hemline towards the top of the pattern. Do not cut all the way through the pattern, leave a 1-2mm "hinge." The hinge will give you the freedom to move the parts of the pattern easily, but will still keep the pieces together. Repeat for the second line. 

3. Place the pattern on top of a piece of pattern paper, slightly larger than the pattern piece. Spread the pieces apart, by the desired amount, being careful to distribute the width evenly. When you are happy, tape (or glue) the pieces down carefully.

4. Redraw the hemline with a smooth curve. If the opposite edge has changed shape too drastically you should also re-draw the line.

cut_and_spread_therushcutter_2.gif

The method is the same for reducing volume, you just need to close the cut and spread line, rather than open it.

Shortening pattern

There are two ways of shortening a pattern - the first is to simply remove some length from the hem of the pattern. This method is often used when a garment has been made up and then once it can be tried on and fitted, the length is determined.

The other method is to shorten the pattern piece by removing the length from inside the pattern piece. By using this method, the overall shape of the pattern piece will not be lost.

For this method, you first need to find the 'length and shorten line,' on the pattern piece you would like to shorten. I am using the sleeve from The Rushcutter as an example, but this method can be used on any of the pattern pieces.

Cut along the line to create two separate pieces.

Think about how much length you would like to remove from your pattern piece. Mark this distance on one side of the pattern, measuring from the cut line. Marking this point on the grainline will help ensure the mark remains perpendicular to the cut line. 

Draw a perpendicular line through this point, extending to either side of the pattern piece. 

Move the unmarked pattern piece (in this case, the lower part of the sleeve) to line up with the perpendicular line just drawn, and tape (or glue) in place. 

Β 

You can now redraw the seam lines on each side of your pattern with a straight line (or a curve, if your pattern piece has curved seams).

Lengthening a pattern

For lengthening a pattern piece, the concept is exactly the same. Cut up through the 'lengthen and shorten line' and separate the pattern into two pieces.

Open the pattern pieces by the amount you want to lengthen your pattern piece by. Tape a piece of pattern paper onto the back ofthe pieces to fill the gap.

Redraw the side seams with a straight line, and you are done!

I think that's enough pattern altering for today's post, in the next post I'll show you how to slim down the dress by removing some width from the side panel, move the dart on the raglan sleeve (View A), move the shoulder seam (View B) and adjust the pocket.


You may also like: